Linn's highest quality speaker cable, K200 uses a twisted pair of 60-strand (4 sq mm) copper core, offering superior shielding and audio performance over K20.

Enclosed in a flexible sheath, K200 is easy to manipulate for neat installation and compact enough to be used in multiple cable runs where multi-wiring is required.

• 2-core loudspeaker cable
• Each core contains 60 strands of copper (4 sq mm)
• Flexible sheath in silver finish
• Outer diameter 8 mm 
• Available in custom lengths

For bi-wire applications where a compact cable is required, K40 offers a high performance and elegant solution.

This cable is available to buy by the metre and features two 2 sq mm stranded copper cores designed to maximise bass performance, alongside two 1.2 mm solid conductors for the treble.

• 4-core loudspeaker cable for bi-wire applications
• 2 cores of 2 sq mm stranded copper designed for low frequencies
• 2 solid core conductors designed for high frequencies
• Flexible sheath in pearlescent white or black finish
• Outer diameter 9 mm
• Available in custom lengths

Containing two 54-stranded copper cores, this discreet speaker cable provides quality signal transmission from your amps to your speakers.

• 2-core loudspeaker cable
• Each core contains 54 strands of 0.3 mm copper (4 sq mm)
• Flexible sheath in grey finish
• Capacitance: 16pF per metre at 1kHz (typical value)
• Inductance: 0.93µH per metre at 1kHz (typical value)
• Available in custom lengths

Our entry level speaker cable is compact and discreet, while offering reliable signal transmission to your speakers.

• 2-core loudspeaker cable
• Flexible sheath in clear finish
• 2.5 m length available, pre-terminated with Deltron connections (as used on Sneaky DS)
• Also available in custom lengths

The Linn Silver balanced interconnect cable is Linn's highest performing interconnect cable.

If your audio equipment has high quality balanced inputs and outputs, the Linn Silver balanced interconnect cable will let you hear just how much better this can sound than an ‘unbalanced’ interconnection.

In addition to the internal balanced conductors it has a double shield, providing electrical noise screening from mains frequencies up to hundreds of MHz. It is silent cable in every sense and will reveal the best performance from the highest quality balanced audio products. It is particularly worthwhile for longer cable runs, for example to power amplifiers located near loudspeakers, or to power integrated active loudspeakers.

• Balanced cable
• Double layer braided and foil shielding for excellent screening from mains frequencies
• 30-strand copper conductor
• Outer diameter 7.6 mm
• Available in 1.2 m pairs, terminated with XLR connectors
• Also available in custom lengths

Linn Silver interconnect cable shares the same low capacitance, low loss dielectric of the Black interconnect cable but has much more extensive shielding.

In any environment with electrical noise present, this is a real benefit. The stiffer construction formed by the heavy double-braided shielding makes the cable much more robust and essentially free of microphony.

• Double layer braided and foil shielding for excellent screening from mains frequencies
• 50-strand copper conductor
• Outer diameter 7 mm
• Available in 1.2 m pairs, terminated with RCA phono connectors
• Also available in custom lengths

One of the benefits of a balanced cable is that the audio signal is carried separately on the two inner conductors, leaving the shield to carry any noisy ground currents.

The inner conductors and insulation on the Black balanced interconnect cable have a similar construction to our standard Black interconnect cable, surrounded by a braided shield and a flexible outer jacket.

• Balanced cable
• Double layer braided and foil shielding for excellent screening from mains frequencies
• 30-strand copper conductor
• Outer diameter 7.6 mm
• Available in 1.2 m pairs, terminated with XLR connectors
• Also available in custom lengths

Linn ‘Black’ interconnect cable is the standard cable for connecting Majik or Akurate components in a Linn system.

This cable is derived from the low capacitance polystyrene dielectric cable used originally to carry the signal from a turntable and cartridge to a pre-amplifier. This ‘phono’ signal is probably the most demanding of all signals in any audio system, usually less than one thousandth of the signal between a CD player and an amplifier. A cable good enough to handle this signal will accurately transfer any other low level audio signals in an audio or AV system.

• Double layer braided and foil shielding for excellent screening from mains frequencies
• 45-strand copper conductor
• Outer diameter 5.1 mm
• Available in 1.2 m pairs, terminated with RCA phono connectors
• Also available in custom lengths